|
PM210A 3-phase Multifunction Power Monitor
|
|
The PM210 is a 3 phase multi-function power monitor. Its compact size makes it the ideal solution for space constrained applications. This compact panel meter shares most of the key power measurement parameters that its larger full sized cousins feature.
The PM210 is a compact version of the EPM420, with the capability to display the voltage, current, kw, kwh, kvarh and pf. The PM210 has a small footprint, low depth and is ideal for small panels or space constrained applications. The PM210A has high accuracy over its entire range, and yet quite economical. It also sports a Modbus over RS485 capability. It can be used in either 3 phase 3 wire or 3 phase 4 wire configuration. It can be used with regular 5A output CTs, and is optionally available with our split core CTs or small dedicated donut CTs for space constrained applications.
 PM210 datasheet
PM210A manual (PDF, 2.1 MB)
PM210A calibration report (2009/12/24)
PM Series Power Meters FAQ
|
|
| PM200 KWH 3-Phase Sub Meter |
 |
The PM200 is compact 3-phase KW and KWH panel meter. The PM200 uses the latest in digital measuring technology allowing it to achieve a level of accuracy over a wide range usually reserved only for revenue class meters. The PM200 also includes communication capability through Modbus over RS485. The PM200 can be used with regular 5A output CTs, but it can also be used with our split core CT or small sized dedicated donut CTs.
Download the Brochure (PDF, 650 KB)
Submetering FAQ
PM200 vs DEM Comparison
PM Series Power Meters FAQ
|
|
| PM100 Single Phase Multifunction Power Monitor |
 |
The PM100 is a single phase multi-function power monitor. Its compact size makes it the ideal solution for space constrained applications. This compact panel meter shares most of the key power measurement parameters that its larger full sized cousins feature.
PM100 Brochure (PDF, 688k)
PM Series Power Meters FAQ Submetering FAQ |
|
|
EPM420 Multi-Function Power Monitor
|
|
The EPM420 is a 3 phase multi-function power monitor that can be used to monitor multiple parameters at the same time. It provides real time readings of the current, voltage real and reactive power, power factor and frequency with true RMS measuring accuracy. With its Modbus over RS485 port it can be easily be connected to any host station for remote monitoring. Its multi-LED display allows the reading to be seen even at a distance and in poor lighting conditions.
EPM420 Datasheet (2010/01/15)
|
|
|
Basic Electronic kWh Meter
|
|
As its name implies, this line of sub meters constitute the most basic of all the meters available from DAE. They are no frills electronic kWh sub meters for those on a budget, ideal for anyone who wants to be able to do sub metering without all the fancy features. They are available in a wide range of models through a combination of different specifications that can meet nearly any need from single phase two wire to three phase four wire and anywhere in between, even the hard to found single phase three phase is available.
Basic Electronic KWH Meter-1.0e.pdf(2009-11-02)
Submetering FAQ
PM200 vs DEM Comparison
|
|
| Dedicated CT Sub Meter |
 |
The dedicated CT series of sub meters is the ideal sub meter to use for the retrofitting of existing installations with constrained spaces but requiring large numbers of sub meters. The dedicated CTs are an integral part to the meter, these dedicated CTs are an economical alternative to traditional large size CTs.
Download the Brochure (PDF, 180k)
CT Applications FAQ |
|
|
Regular Small Sized Solid Core CT
|
|
Small in size, these CTs are ideal for applications with constrained space requirements such as existing installations where conventional CTs wouldn't fit. They are less than half the size of conventional CTs. They have an output of 1A and are available in 100A or 200A versions.
Datasheet CT-3.4e.pdf (2009-11-19)
CT Applications FAQ
|
|
|
Dedicated Small Sized Solid Core CT
|
|
These dedicated solid core current sensors are ideal for space limited sub metering applications where conventional CTs wouldn't fit. They are only one-third the size of conventional CTs. They are available in 100A or 200A versions. These are specially designed to be used with our PM series of panel meters and is not compatible with other brand of meters.
Datasheet CT Dedicated-1.4e.pdf (2009/12/07)
CT Applications FAQ
|
|
|
|
Dedicated Split Core CT
|
|
These split core current sensors are most appropriate for applications that cannot allow the power to be interrupted, and because of their small size, they can be installed onto existing cramped panels. These are not your regular 5A output CTs and is available only as an option with most of our meter models.
Datasheet CT Dedicated-1.4e.pdf (2009/12/07)
CT Applications FAQ
|
|
|
Dedicated Clamp Type CT
|
|
Clamp type current sensors are used in applications that does not allow the power to be interrupted, they are used similar to clamp type current meters with a small handle, and does not occupy much space. These are available in 200A or 400A models.
Datasheet CT Dedicated-1.4e.pdf (2009/12/07)
CT Applications FAQ
|
|
|
|
|
|
|
Electricity Meters
